On this page (7 sections)

A heap-based buffer overflow has been recorded in the D-Link DIR-878 router, firmware 1.20B05, under the identifier CVE-2026-124560. According to the GitHub Advisory Database entry, the flaw sits in the HNAP handler, can be triggered remotely, and a public exploit is said to exist.

The detail that matters most for owners is that the record states the affected product is no longer supported by its maintainer. That makes a vendor fix unlikely, so the practical response is to reduce exposure or replace the device. This applies to anyone still running a DIR-878 at an office, a shop or a home that hosts a website or remote access.

What happened

The vulnerability was published on November 9, 2026 and appears in both the NVD record and the GitHub Advisory Database. The NVD text is identical to the GitHub text, so these are one report, not two independent confirmations. The GitHub entry is marked as unreviewed, and lists affected and patched versions as unknown.

The description says the function GetCAPTCHAsetting in the file bin/prog.cgi is affected, and that manipulating the argument uid leads to a heap-based buffer overflow. The attack can be started over the network, and the advisory says an exploit has been made public. The references include a public repository and entries on VulDB. We have not reviewed or reproduced that material and do not describe it here.

Technical details in plain terms

A heap-based buffer overflow happens when a program copies more data into a memory area than it was sized to hold, and the extra data spills into neighboring memory. The record maps this to CWE-119 (improper restriction of operations within the bounds of a memory buffer) and CWE-122 (heap-based buffer overflow). Depending on the device, such bugs can crash the service or, in the worse case, let an attacker alter how the program runs. The research does not say which outcome applies here, so treat that as unconfirmed.

HNAP (Home Network Administration Protocol) is a management interface used by some D-Link routers. The flaw is in a request handler within that component, reached by a parameter called uid.

The CVSS v4 metrics shown in the GitHub advisory describe the following profile:

  • Attack vector: network
  • Attack complexity: low, with no attack requirements
  • Privileges required: none
  • User interaction: none
  • Impact on the vulnerable system: high for confidentiality, integrity and availability
  • No impact listed on subsequent systems

In short, the scoring assumes an unauthenticated attacker who can reach the device over the network. Whether the HNAP service is reachable from the internet on a given router depends on its configuration, which the research does not cover.

Who is affected

The record names one product and firmware: D-Link DIR-878 running 1.20B05. Other firmware revisions may or may not be affected; the advisory lists them as unknown, so do not assume an older or newer build is safe.

Exposure is highest where the router's management interface can be reached from the internet, or where untrusted users or devices sit on the same network, such as guest Wi-Fi shared with the main LAN. A compromised router sits in front of everything behind it, including the web server, point-of-sale devices and staff laptops, so small businesses and home offices should not treat this as a minor consumer issue.

How to check your exposure

  1. Find the model label on the underside of the router. If it reads DIR-878, continue.
  2. Sign in to the router's admin page from inside your network and open the firmware or system information screen to read the installed version. Compare it to 1.20B05.
  3. Check the D-Link support site at dlink.com for the product's status and any notice for this model. The CVE record says the product is no longer supported, so expect no new firmware.
  4. Look in the admin settings for remote management or remote administration and note whether it is enabled.
  5. From a network outside your own, such as a mobile hotspot, test whether your router's admin page loads on your public IP address. If it does, the device is exposed to the internet.
Menu names differ between firmware versions, so we do not give exact paths. Use the router's own help if you cannot find a setting.

What to do now

No fix is listed, and the vendor is described as no longer supporting the product. The most reliable answer is replacement, with the steps below to limit risk until then.

  1. Plan to replace the DIR-878 with a model that still receives security updates from its vendor.
  2. Turn off remote management and any internet-facing administration on the router today.
  3. Make sure the router's admin page is reachable only from a trusted internal network, not from guest Wi-Fi or the internet.
  4. Move guest and IoT devices to a separate network from computers and servers, if the router supports it.
  5. Place the router behind another firewall or network device that blocks inbound management traffic, where you have one.
  6. Change the router admin password to a long unique one, and keep a record of the current configuration.
  7. Check the D-Link support site periodically in case a notice or firmware appears, and apply it only if it comes from D-Link directly.
  8. After replacing the device, factory reset the old router before disposal or resale.
Caution. Changing router settings can cut your connection, including remote access you rely on. Make changes while you are on site and can reconnect by cable.

Detection and monitoring

Because a router overflow is a network-device problem, the signs show up indirectly. Watch for unexpected router reboots, settings that changed without you, unfamiliar DNS servers configured on the router, new port forwards, and unexplained outbound traffic. If you see any of these, follow our guide on what to do if a website is hacked and treat the router configuration as untrusted.

For the websites behind the router, an outside check helps catch the downstream effects, such as redirected DNS or a changed certificate. Webforta Monitor can alert on certificate, DNS and header changes, and the free SSL checker lets you confirm what certificate visitors currently see. Neither can tell you whether the router itself is vulnerable or compromised. For background, see our small business website security guide.

What we do not know

  • Whether other DIR-878 firmware versions are affected.
  • Whether the flaw has been exploited against real devices; the research reports no such confirmation, and the CVE is not in CISA KEV.
  • Whether D-Link has issued any statement. Only the NVD and GitHub entries were available, and they carry the same text.
  • Who assigned the 8.9 CVSS score; the GitHub page shows the v4 metrics without naming the scorer.

Sources

This article is based on the public sources below. Details can change as vendors and researchers publish more; check the original advisories before acting on version numbers.

  1. CVE-2026-124560 - GitHub Advisory Databasegithub.com
  2. CVE-2026-124560: A vulnerability was found in D-Link DIR-878 1.20B05.nvd.nist.gov ·
  • D-Link
  • DIR-878
  • router security
  • buffer overflow
  • end of life