On this page (7 sections)

A stack-based buffer overflow, tracked as CVE-2026-132141, has been published for DrayTek Vigor2960 firmware up to and including 1.5.1.6. According to the NVD record, it can be attacked remotely and the exploit is now public. The record names firmware 1.5.1.7 as the upgrade that can resolve it.

If you run a Vigor2960 as the edge router or VPN gateway for an office, a hosting rack or a client site, this is worth checking today. Only one independent publisher covers the issue so far, so some details below are marked as unconfirmed.

What happened

The record was published on 2026-11-18. It describes a flaw in the function json_load_lock in /cgi-bin/mainfunction.cgi, part of the Jsonstatus component. Manipulating the argument usefile causes a stack-based buffer overflow. The description states the attack can be launched remotely and that a public exploit is available.

The description also quotes the vendor: version 1.5.1.6 is not the latest release for the 2960, the latest version fixes many security issues, and another release is planned that should address the issues reported. In other words, DrayTek points to staying current on firmware, and a further update is expected.

Technical details in plain terms

A stack-based buffer overflow happens when a program copies more data into a fixed-size memory area on the stack than it can hold. The extra data overwrites neighboring memory. Depending on the device and its protections, the usual outcomes range from a crash and reboot to, in worse cases, an attacker influencing what the device runs. The research does not say which outcome applies here, so treat the impact beyond the High rating as unconfirmed.

The vulnerable input is a request parameter handled by a CGI program, which is part of the router's web management interface. That is why the main exposure question is simple: who can reach that interface?

The public analysis case linked from the record is titled "authenticated-jsonstatus-usefile-stack-overflow". That suggests login may be needed to reach the flaw, but the NVD description does not state it, so do not rely on it as a mitigation. Assume an attacker could obtain or guess credentials.

Who is affected

Any Vigor2960 running firmware 1.5.1.6 or earlier is in scope. Risk is highest where the management web interface is reachable from the internet, or from a network segment with untrusted users, guests or compromised hosts. Devices managed only from a locked-down internal network are less exposed, but should still be updated because a public exploit exists.

For website owners, the router matters even if your site is hosted elsewhere. A compromised gateway can expose internal admin panels, staging servers, VPN access and traffic for anything behind it.

How to check your exposure

  1. Open the router's web interface from inside your network and read the firmware version on the dashboard or system status page.
  2. Compare it with 1.5.1.6. Anything at or below that is affected; 1.5.1.7 is the version named as the fix.
  3. Find out whether the management interface is reachable from the internet. Test from an outside network (for example a mobile connection) by trying to load the router's public address on its management ports.
  4. Review who has admin accounts and whether any are unused or share weak passwords.

You can also review what your public addresses expose using an external scan of a host you own. Webforta's security scanner runs read-only scans of websites you verify, which helps with web servers behind the router, though it is not a substitute for checking the router itself.

What to do now

  1. Record the current firmware version of every Vigor2960 you manage.
  2. Download firmware 1.5.1.7 only from DrayTek's official firmware site (the NVD record references the vendor's v1.5.1.7 package) and check the release notes.
  3. Back up the router configuration, then schedule a short maintenance window for the upgrade.
  4. Apply the upgrade and confirm the new version on the status page afterwards.
  5. Disable web management from the WAN side. If remote administration is needed, allow it only through a VPN or a short allow-list of trusted IP addresses.
  6. Change administrator passwords, remove unused accounts and enable any available login restrictions.
  7. Watch for a further DrayTek release, since the vendor says another one is planned to address the reported issues.
Caution. Upgrading firmware reboots the router and interrupts connectivity and VPN tunnels. Do it in a maintenance window, keep a configuration backup, and make sure you have out-of-band access in case the device does not come back cleanly.
Tip. If you cannot upgrade immediately, restricting who can reach the management interface is the most useful interim step. It reduces exposure but does not fix the flaw.

Detection and monitoring afterwards

The research gives no indicators of compromise, so there is no reliable signature to hunt for. Practical signs to watch for are unexpected router reboots or crashes, configuration changes you did not make, new admin accounts, new port forwards or VPN users, and repeated requests to the router's management CGI paths in any logs you keep.

  • Forward router logs to a central log server so entries survive a reboot or tampering.
  • Alert on firmware version drift and on management access from unfamiliar addresses.
  • Monitor the public services behind the router for uptime, certificate and DNS changes. Webforta's monitoring covers uptime, certificates, DNS and header changes, which can surface side effects of a gateway problem.

If you suspect a device was already abused, follow our guide on what to do when a website is hacked and rotate every credential that passed through or was stored on the router.

What we do not know yet

The research does not confirm exploitation in the wild, the exact impact, or which party assigned the 8.6 score. The vendor statement suggests a further firmware release is coming. Treat 1.5.1.7 as the fix named today and recheck DrayTek's firmware page for newer versions.

Sources

This article is based on the public sources below. Details can change as vendors and researchers publish more; check the original advisories before acting on version numbers.

  1. CVE-2026-132141: A vulnerability was detected in DrayTek Vigor2960 up to 1.5.1.6.nvd.nist.gov ·
  • DrayTek
  • Vigor2960
  • buffer overflow
  • router security
  • firmware update