On this page (7 sections)

CVE-2026-121933 is a critical missing-authentication flaw in the Setup Wizard of the Linksys E5350 router, reported against firmware 1.0.00.037. According to the GitHub Advisory Database entry, the attack can be launched remotely and an exploit has been published.

The advisory says the vendor was contacted early but did not respond. No fixed version is listed. If you run, manage or host sites behind an E5350, or support clients who do, read on for what is known and what you can do today.

What was reported

The flaw sits in the function save_settings in the file /wizard/apply.cgi, part of the router's Setup Wizard. Manipulating the argument wizard_router_pwd can lead to missing authentication, per the advisory text. The record was published on November 4, 2026, and the NVD entry carries the same description.

A public write-up linked from the advisory is titled as an empty admin password authentication bypass, hosted in a GitHub repository. We did not have its contents, so we cannot describe the exact behavior beyond what the advisory states.

Only one independent publisher covers this so far. The NVD page repeats the same text and is not separate confirmation. Treat details such as which other firmware versions are affected as unconfirmed.

Why missing authentication matters on a router

Missing authentication means a function that should require a logged-in administrator can be reached without proving who you are. On a router, a setup or settings endpoint is especially sensitive because it can change the administrator password and other configuration. The advisory's CVSS v4 metrics describe network attack vector, low complexity, no privileges, no user interaction, and high impact on confidentiality, integrity and availability.

In practical terms, whoever controls the router can see and redirect the traffic of everything behind it, including office staff, admin panels and any self-hosted site. We are not claiming that outcome has happened here; it is the general risk of losing control of a gateway device.

Who is realistically exposed

  • Homes, small offices and branch sites that use a Linksys E5350 as their gateway.
  • Anyone whose router web interface is reachable from the internet, or from a network an attacker can reach. The advisory says the attack may be launched remotely, but does not say under which management settings.
  • Developers and admins who reach staging servers, hosting panels or CMS dashboards from a network behind this router.

Servers in a data center or on managed hosting are not affected by this router flaw directly. The exposure is the network your team works from.

How to check your exposure

  1. Identify the model and firmware. Log in to the router admin page from inside your network and note the model (E5350) and firmware version (the reported version is 1.0.00.037).
  2. Check whether remote or WAN-side administration is enabled in the router settings, and turn it off if you do not need it.
  3. From a device outside your network, test whether your public IP answers on the router's web management ports.
  4. Review the router's configuration for unexpected changes: a blank or changed admin password, altered DNS servers, or unfamiliar port forwards.

For sites you run, the Webforta Scan can check verified websites from the outside, and the free SSL checker can confirm certificates look as expected. Neither inspects your router, so they complement rather than replace the steps above.

What to do now

No vendor patch is listed, so the aim is to reduce reachability and limit damage. Check the Linksys site for any firmware or advisory updates, since the sources list none.

  1. Confirm whether you own an E5350 on firmware 1.0.00.037.
  2. Disable remote (WAN) administration and any UPnP or port forwards to the router interface.
  3. Set a strong, unique administrator password and confirm it is not blank.
  4. Restrict router management to a wired, trusted LAN segment where possible.
  5. Check DNS settings and port forwards for changes you did not make.
  6. Watch Linksys channels for a fixed firmware release and apply it promptly.
  7. If the router sits in front of anything important and no fix appears, plan a replacement with a supported model.
Caution. If you find a changed admin password, unknown DNS servers or unexplained port forwards, assume the router is compromised. Change credentials for accounts used behind it from a different, trusted network, and follow a recovery process such as what to do when a website is hacked.

Detection and monitoring afterwards

  • Keep a record of the router's known-good configuration so changes stand out.
  • Review router logs, if available, for logins or settings changes at unexpected times.
  • Monitor your public sites for unexpected DNS changes and certificate changes, which can follow network-level tampering. Webforta Monitor tracks uptime, certificate and DNS changes for your domains.
  • Re-check the advisory and Linksys for updates; the affected-version list may grow as more information arrives.

More router disclosures

If you manage other consumer or small-office routers, see our security news archive for recent router disclosures. Each CVE is a separate issue, and nothing in the sources for this one links it to other products.

Sources

This article is based on the public sources below. Details can change as vendors and researchers publish more; check the original advisories before acting on version numbers.

  1. CVE-2026-121933 - GitHub Advisory Databasegithub.com
  2. CVE-2026-121933: A flaw has been found in Linksys E5350 1.0.00.037.nvd.nist.gov ·
  • Linksys
  • router security
  • CVE-2026-121933
  • authentication bypass
  • no patch